| This new type of mechanics opens the door to a
wide range of functions and applications. It is difficult
to thoroughly describe this technology. The technology
is continuing to evolve...mix and match construction
results in many movements and functions, available singly
or in combination, parallel or series combinations,
even within a single device or system.
(Link: Costs,
manufacturing)
Construction method may vary according to the materials
chosen and the functions
desired. Initially, exploring the technology and getting
a feel for it can begin with a basic model; later moving
on to more accurate, suitable prototypes tailored to
a specific application. It will help to get your hands
on it and your mind around it, as you feel its many
different motions. Nothing compares with the feel of
scroller geometry.
(Link: Geometry)
Here are two easy ways to make working models:
- 8 belts
- 4 orbit rollers
- 1 centre roller
(Link: Long
Model)
- 4 belts
- 4 orbit rollers
- 1 centre roller
(Link: Short
Model)
- 1. If you want it to be self-supporting ....
2 bands per outer roller.
- 2. If you attach 2 shafts [in and out] to
other equipment .... one
- band per outer roller.
- 3. If you use a rigid outer sleeve .... one
band per outer roller plus
- outer-bands of any number.
- 4. If you use a flexible outer sleeve ...
2 bands per outer roller.
note: if you use more than 5 rollers,
the inner-roller must be larger
than the outer-rollers
These two configurations are the most practical for
explaining belt offset, balance and
stability. Depending on the roller length,
roller / belt number or application, the variety of
roller / belt combinations are endless. The chosen
configuration must simply result in a balanced, stable
cluster of parallel rollers.
|
